CAD/CAM Systeme Datentechnik Reitz GmbH & Co. KG


Objekt-ID:115
Servicetyp:3D Software
Adresse:CAD/CAM Systeme Datentechnik Reitz GmbH & Co. KG Perfstraße 2 35236Biedenkopf-Breidenstein Germany
Preis:Preis auf Fragen
Beschreibung:

The Company CAD/CAM Systems 
Datentechnik Reitz GmbH & Co. KG from Breidenstein near Marburg has been offering CAD/CAM solutions for all areas of manufacturing since 1994.
The company was founded by Andreas Reitz, the current managing director.

Datentechnik Reitz offers its customers an integrated solution from the first presentation of the software to the preparation of a quotation, installation and adaptation to the customer's machines, as well as training in your training rooms or at the customer's site.
The software is then also completely supported by Datentechnik Reitz.

Datentechnik Reitz has a 5-axis milling machine and a robot from Kuka to test the software on real parts and provide the customer with complete training, as well as being able to show live machining with the machine or robot.

About the software
As a distributor for the countries Germany, Austria and Switzerland, Datentechnik Reitz offers the CAM system SprutCam and the corresponding CAD solution.
Over 600 customers have been acquired in these countries over the years. The software is characterized above all by the high adaptation to the customer's machinery, so that milling machines, cutting machines or robots, as well as lathes and eroding machines can be controlled.
The number of controllable axes is not limited at this point. Additional axes such as rotary tables, rails or feed units can also be programmed. Data from any CAD system can be used as the basis for programming.

You can also create and manipulate your own contours in the 3D CAD system. The interfaces to other systems range from Catia, Inventor, Solidworks, Solidedge, etc. to Rhino, Megacad or NX. Third-party formats such as Parasolid, IGES, ACIS, STL, etc. can also be read and edited.

Strengths of the software
The software is always programmed on the machine or robot model. The machine simulation is always available. This has the decisive advantage that collisions, travel limits, singularities or unfavorable movements are already detected during programming and not in the subsequent simulation. All modules are developed by SprutCam and all modules are operated in the same way; whether lathe or robot. The interface is absolutely identical and there is no need to switch between interfaces or different programs. The advantage for the customer is obvious. Easier to learn and changes are really associative. So if the CAD model changes, this can also be changed to the NC program. The numerous modules make it possible to support all technologies. A system change due to a new machine or a new technology is not necessary.

Strengths of Datentechnik Reitz
All Datentechnik Reitz employees have experience with CNC machines and/or robots. This has the decisive advantage that all employees are not only familiar with the software, but also with the machining methods.
The company focuses exclusively on the CAD/CAM market. And has been doing so for more than 20 years. Training can be provided not only on the software, but also on the machine or robot. This is how we bring practical experience to CAD/CAM programming.
Datentechnik Reitz currently employs 4 programmers who take care of both post-processor programming and special programming. Thus, any special cases can be programmed for customers. For example, the software "Mammut graphics" of the company Stutznäcker was completely programmed by Datentechnik Reitz. Further projects are e.g. the development of serial number modules. Also nesting programs or CAD solutions were implemented by Datentechnik Reitz.

A word from the managing director
Our goal is to offer our customers a solution around CAD/CAM. If we can do this with our standard modules SprutCam and Spaceclaim, all the better. However, if special developments are necessary, we can realize this without any problems. This is where we differ from our competitors. Special developments in high level languages are in most cases not feasible.
The development of customer specific needs is the key to success. Nowadays it is no longer possible to satisfy all customers with standard software alone. There are more and more special applications beyond milling, turning and eroding. Be it the programming with robots, the marketing of an own CAD system, the control of welding machines, sewing machines or other CNC controlled systems. Together with our employees we offer a solution for the programming of these systems. That is our goal.

 

PRODUKTE UND DIENSTLEISTUNGEN:Konstruktion und Konstruktion von Teilen PLM- und CAD-Software Simulation CAM Software Prozesssimulation Fräsen, Drehen, Schleifen Digitalisierung und Softwareentwicklung Prototyping Mess- und Vorrichtungsfertigung

Typ:verkaufen


Die Liste der Kommentare ist leer.

Allgemeine Informationen
    • 3d software
  • Preis auf Fragen
Die Anzeige von
CAD/CAM Systeme Datentechnik Reitz GmbH & Co. KG
  • CAD/CAM Systeme Datentechnik Reitz GmbH & Co. KG
  • Telefon zeigen
  • Alle Inserate (1)

bitte erzähle deine Geschichte

Möchten Sie gerne verkaufen  schneller?

gelten bezahlten Dienstleistungen